Xiamen XDE Industry Co.,Ltd
Contact US
ADD: 30F, No.253 South Hubin Road, Xiamen, China
TEL: +86-592-2205159
FAX : +86-592-2211089
Home > Knowledge > Content
What measures need to be prepared for screw conveyor operation?
- Jul 12, 2018 -

screw conveyor operation.png

The operating platform, the upper and lower ladders and the protective railings should be repaired in time. During the hoisting process: it is strictly forbidden to stand under the cement silo/cement tank, and it is necessary to wait for the lifting object to be close to 1 m below the ground. Field personnel must wear a safety helmet, and operators are strictly forbidden to drink and fight on the spot.

High-altitude workers must wear seat belts. When walking, people should not look around. Do not lean against the guardrails during rest.

Before lifting: Do not place any objects on the work platform frame, adjust the center of gravity, apply the snap ring and safety hook when lifting. When installing the concrete mixing station: it should be installed once from the inside to the outside.